Transit-time Ultrasonic: Sono-Trak™

EMCO's Sono-Trak™ combines advanced non-invasive flow measurement technology with a versatile transmitter design to provide an accurate, maintenance free, easy-to-install, and easy to use measuring system. The Sono-Trak measures liquids for pipe sizes from 2 to 100 inches.

Reliable and Rugged:

• High accuracy: ±0.5% of rate (factory tested); ±2.0% of rate (typical field installation); ±0.1% of rate repeatability
• Time domain expansion technology improves signal processing and dramatically increases resolution
• With no moving parts to wear over time, flowmeter maintenance is non-existent
• Rugged, NEMA 6-rates transducers are fully submersible
  No pressure drop
• FM and CSA approvals (pending)

Fast & Easy Installation:

• Typical installations take less than 30 minutes with the non-invasive, clamp-on design using all stainless steel quick clamps
• No worries of flange requirements, pressure ratings, process liquid interaction issues, pipe vibrations, or upstreams transitions
• Heavy-duty, urethane-coated cables are pre-terminated to facilitate a speedy installation
• Easy-to-read blue backlit display allows for quick flowmeter set-up, featuring EMCO's patented menu-driven EZ-Logic user interface

Flexible:

• The same Sono-Trak flowmeter can be installed on line sizes from 2 to 100 inches (50 to 2540 mm)
• Plug-and-play, "buffet-style" input/output module options enable custom electronics configuration and/or field retrofits/upgrades; choose two from: pulse, analog, relay, RS-232, RS-485, BTU, and data logger
• Standard, built-in infrared capability for use with optional Windows® software

Insertion Vortex : V-Bar™

EMCO's model V-Bar is an insertion vortex shedding flowmeter. The V-Bar provides significant cost savings for line sizes from 3 to 80 inches without compromising performance. With high accuracy, microprocessor-based electronics, no moving parts, and rugged construction, EMCO's V-Bar gives our customers the benefits of over 30 years of practical experience. The V-Bar measures liquids or gases, including steam, for pipe sizes from 3 to 80 inches.

Unparalleled Performance:

• ± 1.0% of rate accuracy for liquids
• ± 1.5% of rate accuracy for gas and steam
• ± 0.15% of rate repeatability
• Turndown ratio up to 25:1
• FM and CSA approvals
• Calibration is traceable to NIST

Significant Cost Savings:

• One V-Bar flowmeter is suitable for pipe sizes from 3 to 80 inches, so there is one purchase price regardless of pipe size, resulting in typical savings of up to 80% for 24" lines and 50% for 10" lines compared to full-bore flowmeters
• Installed quickly and easily, saving as much as 70% in labor installation costs when compared to full-bore flowmeters
• Hot tap compatible installation allows removal without process shutdown; this not only avoids disruption of a critical process, but also reduces labor costs
• No moving parts reduces maintenance costs
• Negligible pressure drop, typically 10 times less than an orifice plate, reduces energy and operating costs
• Optional integral pressure and temperature measurement enables mass flow measurement from one pipe tap (installation)

Ease of Operation:

• Factory calibrated and programmed for specific applications
• Start-up without any additional calibration or programming
• The local display alternates between flow rate and totalized flow
• Menu-driven EZ-Logic™ user interface enables local programming
• HART® protocol communication

Insertion Turbine: Turbo-Bar™

EMCO's Turbo-Bar provides significant cost savings for line sizes from 3 to 80 inches without compromising performance. With high accuracy, wide turndown, and a unique low- mass rotor design without welded joints, EMCO's Turbo-Bar gives our customers the benefit of over 30 years of practical experience. The Turbo-Bar measures liquids or gases, including steam, for pipe sizes from 3 to 80 inches.

Unparalleled Performance:

• ± 1.0% of rate accuracy
• ± 0.25% of rate repeatability
• Turndown ratio up to 35:1
• FM approval
• Calibration is traceable to NIST

Significant Cost Savings:

• One Turbo-Bar flowmeter is suitable for pipe sizes 3 to 80 in., so there is one purchase price regardless of pipe size, resulting in typical savings of up to 80% for 24 in. lines and 50% for 10 in. lines compared to full-bore flowmeters
• Installed quickly and easily, saving as much as 70% in labor installation costs when compared to full-bore flowmeters
• Hot tap compatible installation allows removal without process shutdown; this not only avoids disruption of a critical process, but also reduces labor costs
• Optional bi-directional flow measurement enables one Turbo-Bar flowmeter to replace two uni-directional flowmeters
• Negligible pressure drop, typically 10 times less than an orifice plate, reduces energy and operating costs
• Unique low mass rotor design is fabricated from one solid block of stainless steel, with no welded joints, maximizing rotor longevity and increasing sensitivity to changes in flow
• Optional integral pressure and temperature measurement enables mass flow measurement from one pipe tap (installation)

Ease of Operation:

• Factory calibrated and programmed for specific applications
• Start-up without any additional calibration or programming
• EZ-Logic™ local display alternates between flow rate and totalized flow
• Menu-driven EZ-Logic user interface enables local programming
• HART® protocol communication